5
Cleaning of vertical surfaces:
Always hold Trigger Gun and T-Racer with both hands.
Do not reach under the edge of the T-Racer while the device is in operation.
APPLICATION DIRECTIONS
Please Note:
Do not run over free-standing corners!
Never operate in the same area for more than
2 seconds, damage may occur.
Do not use on windows.
REPLACEMENT OF THE NOZZLES
Note
: The nozzles must be
removed for cleaning or for the
exchange of the nozzles.
1. Remove the clamp.
2. Pull out the old nozzle.
3. Insert the new nozzle.
4. Secure nozzle with clamp.
