8
English
5.906-513.0 Rev. 00 (12/10)
10 Fine dust
11 Dirt receptacle
When vacuuming larger volumes of fine dust, the flat
fold filter plugs up fast. When the Tact filter cleaning
system is turned on, the electro-magnet opens the di-
aphragm every 15 seconds, so that an air flow can
clean off the flat fold filter via sudden pressure revers-
al.
It is recommended to switch off the Tact filter cleaning
system while vacuuming coarse dirt and liquids.
Note
The Tact filter cleaning system can only be switched
on/off when the vacuum is switched on.
1 Flat fold filter
2 Air input, left
3 Filter cover
4 Handle on the filter cover
5 Casing, Tact filter cleaning system
6 Air input, right
Note
For wet and dry vacuuming, the flat fold filter must al-
ways be installed.
After the wet vacuuming has ended, the flat fold filter
must be dried.
To vacuum fine dust, you must use an additional pa-
per filter bag or a membrane filter (special accesso-
ry). These must always be removed prior to wet
vacuuming.
1 Suction turbine
2 Air input
3 Coarse dirt
4 Fine dust
5 Dirt receptacle
6 Air outlet
7 Flat fold filter
8 Tact filter cleaning system
The air flows from the air input through the waste con-
tainer and flat fold filter via the suction turbine to the
exterior.
4.6
Suction head, filter cover opened
4.7
Suction system
