16
English
5.906-513.0 Rev. 00 (12/10)
1 Suction turbine
2 Connecting cable, suction turbine
3 Air channel
Pull the connection plug of the turbine from the
PCB.
Note
Prior to removing the suction turbine, please observe
the alignment of the suction turbine and the seating
of the sealing rubber. This information is important for
the installatin of the new suction turbine.
Remove the suction turbine.
1 Carbon brushes
2 Cable connection, suction turbine
Install the new suction turbine in reverse order.
Remove the hood.
Remove the turbine casing.
1 Left electrode
2 Electrode cable, left
3 Electrode cable, right
4 Right electrode
Disconnect the connecting cables from the circuit
board and the electrodes.
Replace damaged connecting cables.
Replace the electrodes.
Install new connecting cables in reverse se-
quence.
5.9
Replace the electrodes of the overflow
protection
3
2
1
4
