English
5.906-513.0 Rev. 00 (12/10)
15
4 Mains cable traction relief
5 Power cord
6 Filter casing
7 Mains cable grommet
Remove the mains cable traction relief.
Remove the mains cable from the cable guide.
Remove the ferrit ring (anti-interference ring).
Thread the mains cable through the grommet.
Install the new mains cable in reverse sequence.
Remove the hood.
Remove the main switch or the switch for the filter
shake off system and disconnect it.
Replace the main switch or the switch for the filter
shake off system.
Connect the new main switch or the new switch for
the filter shake off system as per the circuit dia-
gram.
1 Indicator lamp
2 Rotary regulator, speed regulator, stepless
3 Micro switch
4 Instrument panel
5 Socket
Replace the control lamp, the socket, the micro
switch and the control dial if necessary
Remove the hood.
1 Turbine casing
2 Air channel, engine cooling air - exhaust air
3 Suction turbine
4 Air channel, engine cooling air - suctioned air
5 Fastening screws for turbine housing
Unscrew the fastening screws for the turbine cas-
ing.
Remove the turbine casing.
1 Air channel
2 Sound proofing
3 Turbine casing
5.6
Replace the main switch and the switch
for the filter shake off system
5.7
Replace the control lamp, the socket,
the micro switch and the control dial.
2
1
3
5
4
5.8
Replacing the suction turbine
