English
KMR 1550 D
36
!
Remove 3 hand screws of the
cover plate.
!
Remove cover plate with rocker.
!
Pull out main brush.
♦
Observe the length of the bristles
set!
!
Insert the new sweep roller.
!
Insert cover plate with rocker.
!
Screw down cover plate with
3 hand screws.
!
Tighten hand screw at the rocker.
!
Screw down covering with 3 Allen
screws.
Checking the dust filter
!
Wear a dust protection mask when
working on the filter system.
!
Observe the safety precautions for
handling fine dust.
♦
A damaged filter causes dust
turbulances in the engine
compartment and surroundings.
♦
A perceptible dust deposition at the
blower's air discharge is an
indication of an improperly inserted
or defective filter.
Replacing the dust filter
!
Wear a dust protection mask when
working on the filter system.
!
Observe the safety precautions for
handling fine dust.
!
Swing up debris container.
!
Remove hand screw.
!
Remove the cover plate.
!
Release the hexagonal socket
screws.
!
Turn and pull out coverings.
!
Remove dust filter downwards.
!
Insert new dust filter.
Note:
Make sure that the vanes remain
undamaged when mounting the new
filter.
!
Insert coverings and turn them to
lock.
!
Screw down coverings with the
Allen screws.
!
Tilt back debris container.
Replacing the sealing strips
Side sealing strips
!
Empty the swept material
container.
Only for the left-hand side
!
Unscrew covering.
!
Remove 2 hand screws.
