Kärcher KM 85/50 W P Comfort, Manual

Page: 22 / 262

22
English
 Replace the sealing strip.
 Tighten the fastening of the sealing
strip.
 Side sealing strips
 Loosen the fastening screws of the
sealing strip.
 Replace the sealing strip.
 Screw on new sealing strip without fully
tightening it.
 To set the floor clearance, insert a sheet
with a thickness of between 1 and 2 mm
under the sealing strip.
 Adjust sealing strip.
 Tighten the fastening of the sealing
strip.

Danger
Empty waste container before replacing
dust filter. Wear a dust mask when working
around the dust filter. Observe safety regu-
lations on the handling of fine particulate
material.
 Lock parking brake.
 Remove the waste container.
 Remove the securing splint of the vibra-
tor bar.
 Pull out the bar.
 Unscrew locking screws.
 Remove the tin frame.
 Replace the dust filter.
Note
Make sure when installing the new filter that
the fins are not damaged.
Replacing dust filter
Accessories
Side brushes 6.905-626.0
With standard bristles for indoor and out-
door areas.
Side-brushes, soft 6.906-132.0
For fine dust on inside surfaces; wetness
resistant.
Hard side-brushes 6.905-625.0
For removing stubborn dirt in the external
area; resistant to moisture.
Classic model
Standard sweep roll-
er 6.906-509.0
Resistant of wear and moisture. Univer-
sal bristles for inside and outside clean-
ing.
Comfort model
Roller brush, pro 6.906-508.0
For professional applications, especially
safe against wear and tear.
Dust filter 5.731-585.0
Replace the flat-fold filter at least once a
year. Resistant to moisture, washable
Filter effect > 99,9%, corresponds to cat-
egory C of ZH 1/487 of BIA.