![background image](http://html1.mh-extra.com/html/karcher/khd-4-2/khd-4-2_manual_655646008.webp)
8
English
Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 3
Illustration
Slide the transport handle into the guide
and secure it with 2 screws.
Illustration
Insert holder for trigger gun.
Illustration
Lock the detergent tank in place on the
appliance.
Illustration
Close the detergent tank with the lid.
Connect the suction hose for detergent
to the connection.
Illustration
Screw the coupling element to the wa-
ter connection on the appliance.
Illustration
Hook the accessories net into the hooks
shown in the illustration.
Illustration
Push the high pressure hose into the
trigger gun until it locks audibly.
Note:
Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high pressure hose.
Before
initial
startup, the high-pressure
gun must be coupled to the high-pressure
cleaner.
Insert the mains plug into the socket.
Within one minute, simultaneously
press the + and - buttons on the high-
pressure gun.
Press both buttons until all LEDs in the
display flash.
Digit 3 should now be lit when coupling is
complete.
Park the appliance on an even surface.
Illustration
Connect the high pressure hose to the
high pressure connection of the appli-
ance.
Insert the mains plug into the socket.
For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
ATTENTION
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Illustration
Attach the water supply hose to the
coupling on the water connection.
Connect the water supply hose to the
water supply.
Completely open the water tap.
Note:
The high-pressure cleaner is not suit-
able for taking up water from alternative
water sources.
ATTENTION
Dry running of more than 2 minutes leads to
damage of the high-pressure pump. If the
appliance does not build up pressure within
2 minutes, switch the appliance off and pro-
ceed in accordance with the instructions in
Chapter "Troubleshooting".
Assembly
Coupling of the high-pressure gun
Start up
Water supply from mains
Operation
Summary of Contents for KHD 4-2
