background image

English

Caution

Only separate the high-pressure hose from 
the trigger gun or the appliance while there 
is no pressure in the system.

Î

After working with detergent, suspend 
detergent suction hose in a container 
filled with clear water, switch the appli-
ance on for around 1 minute once the 
spray lance has been removed and 
rinse until water runs clear.

Î

Release the lever on the trigger gun.

Î

Turn off the appliance "0/OFF".

Î

Turn off tap.

Î

Detach the appliance from the water 
supply.

Î

Press the lever on the trigger gun to re-
lease any remaining pressure in the 
system.

Î

Lock the lever on the trigger gun.

Î

Pull out the mains plug.

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
during transport (see Specifications).

Î

Pull the appliance by its transport han-
dle.

Î

Secure the appliance against shifting 
and tipping over.

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
when selecting a storage location for it (see 
Specifications).

Prior to extended storage periods, as dur-
ing the winter, also observe the instructions 
in the Care section.

Î

Park the machine on an even surface.

Î

Insert the trigger gun in its holder.

Î

Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.

Caution

Protect the appliance and its accessories 
against frost.

The appliance and its accessories can get 
destroyed through frost if there are any wa-
ter residues in them. To avoid damage to 
them:

Î

Completely drain all water from the ap-
pliance: Switch the appliance on with 
detached high-pressure hose and de-
tached water supply (max. 1 minute) 
and wait, until no more water exits at the 
high-pressure connection. Turn off the 
appliance.

Î

Store the appliance and the entire ac-
cessories in a frost-safe room.

Finish operation

Transport

When transporting by hand

When transporting in vehicles

Storage

Storing the Appliance

Frost protection

Summary of Contents for K 2.080













Reviews: