background image

9.803-436.0-B •  Operator Kärcher HDS Diesel 

5

  

PRESSURE W

ASHER

 

OPERA

T

OR’S MANU

AL

  

 

RISK OF INJECTION 
OR SEVERE INJURY 

TO PERSONS. KEEP 

CLEAR OF NOZZLE.

WARNING

WARNING: High pressure devel-

oped by these machines will 
cause personal injury or equip-
ment damage. Keep clear of 
nozzle. Use caution when oper-
ating. Do not direct discharge 
stream at people, or severe in-
jury or death will result. 

 

WARNING

PROTECT FROM 

FREEZING

WARNING: Protect machine from 

freezing.

15.  To keep machine in best 
 

operating conditions, it is 

 

important you protect machine 

 

from freezing. Failure to protect 

 

m a c h i n e   f r o m   f r e e z i n g 

 

could cause malfunction of the 

 

machine and result in death, 

serious bodily injury, and/or property damage. Fol-
low storage instructions specifi ed in this manual.

16.   Inlet water must be clean fresh water and no hotter 

then 90°F.

 

WARNING

RISK OF

ASPHYXIATION:  USE 

THIS PRODUCT ONLY 

IN A WELL

VENTILATED AREA.

WARNING: Risk of asphyxiation. 

Use this product only in a well 
ventilated area. 

 17.  Avoid installing machines in 

small areas or near exhaust 
fans. Adequate oxygen is 
needed for combustion or 
dangerous carbon monoxide 
will result.

 18. Manufacturer will not be liable for any changes 

made to our standard machines or any components 
not purchased from us.

 19.  The best insurance against an accident is precau-

tion and knowledge of the machine.

WARNING

RISK OF INJURY 

FROM FALLS WHEN 

USING LADDER.

WARNING: Be extremely careful 

when using a ladder, scaffolding 
or any other relatively unstable 
location. The cleaning area 
should have adequate slopes 
and drainage to reduce the pos-
sibility of a fall due to slippery 
surfaces.

 

 20.  Do not allow acids, caustic or abrasive fl uids to pass 

through the pump.

 21. Never run pump dry or leave spray gun closed 

longer than 1-2 minutes.

 22. Machines with shut-off spray gun should not be 

operated with the spray gun in the off position for 

IMPORTANT SAFETY INFORMATION

 

  In an overfi lling situation, additional precautions are 

necessary to ensure that the situation is handled 
in a safe manner.

WARNING: Risk of injury. Disconnect battery 
ground terminal before servicing.

  8.  When in use , do not place machine near fl ammable 

objects as the engine is hot.

  9. Oil burning appliances shall be installed only in 

locations where combustible dusts and fl ammable 
gases or vapors are not present. Do not store or 
use gasoline near this machine.

 10.  Use No. 1 or No. 2 heating oil (ASTM D306) only. 

NEVER

 use gasoline in your fuel oil tank. Gasoline 

is more combustible than fuel oil and could result 
in a serious explosion. 

NEVER

 use crankcase or 

waste oil in your burner. Fuel unit malfunction could 
result from contamination.

WARNING

RISK OF INJURY. 

HOT SURFACES 

CAN CAUSE BURNS

WARNING: Risk of injury. Hot 

surfaces can cause burns. Use 
only designated gripping areas 
of spray gun and wand. Do not 
place hands or feet on non-insu-
lated areas of the pressure 
washer.

 11.  Transport/repair with fuel tank EMPTY or with fuel 

shut-off valve OFF. 

 

HOT DISCHARGE 

FLUID:   DO NOT 

TOUCH OR DIRECT 

DISCHARGE STREAM 

AT PERSONS.

CAUTION: Hot discharge fl uid. 
Do not touch or direct discharge 
stream at persons.

WARNING: This machine pro-
duces hot water and must have 
insulated components attached 
to protect the operator.

 12 To reduce the risk of injury, close supervision is 

necessary when a machine is used near children. 
Do not allow children to operate the pressure 
washer. 

This machine must be attended during 

operation. 

 

TRIGGER GUN KICKS 

BACK - HOLD WITH 

BOTH HANDS

WARNING

WARNING: Grip cleaning wand 

securely with both hands before 
starting. Failure to do this could 
result in injury from a whipping 
wand.

13.   Never make adjustments on 

machine while in operation.

 

 14. Be certain all quick coupler fi ttings are secured 

before using pressure washer.

Summary of Contents for HDS 5.6/35 De Cage



















Reviews: