– 5
Caution
The highest allowed net impedance at the
electrical connection point (refer to techni-
cal data) is not to be exceeded. In case of
confusion regarding the power impedance
present on your connection, please contact
your utilities provider.
Danger
Risk of explosion!
Do not spray flammable liquids.
Danger
Risk of injury! Never use the appliance
without the spray lance attached. Check
and ensure proper fitting of the spray lance
prior to each use. The screw connection of
the spray lance must be fingertight.
Caution
Never operate device with empty fuel tank
The fuel pump will otherwise be destroyed.
Danger
Switch the appliance off prior to replacing
nozzle and activate hand spray gun until
device is pressureless.
1 Operating with cold water
2 Operating with hot water
3 Eco setting (hot water max. 60 °C)
Set appliance switch to desired operat-
ing mode.
Indicator lamp for operational readiness
lights up.
The device starts briefly and turns off, as
soon as the working pressure is reached.
Release the trigger gun.
When activating the hand spray gun the de-
vice switches back on.
Note:
If no water comes out of the high
pressure nozzle, vent pump. Refer to "Help
with malfunctions - appliance is not building
up pressure".
Set device switch to desired tempera-
ture.
–
For considerate treatment of the envi-
ronment use detergent economically.
–
The detergent must be suitable for the
surface to be cleaned.
Replace the high-pressure nozzle with
the included low-pressure nozzle
(brass).
With support of the detergent dose
valve set detergent concentration as
determined by the manufacturer.
Note:
Recommended values at the control
panel at maximum working pressure.
Note:
If detergent is be suctioned from an
external container, route the detergent suc-
tion hose through the recess to the outside.
Set temperature and detergent concen-
tration according to the surface to be
cleaned.
Note:
To prevent damage due to too much
pressure, always position high pressure ray
first from a greater distance towards object
to be cleaned.
Operation
Replace the nozzle
Operating modes
0/OFF = Off
Turning on the Appliance
Adjust cleaning temperature
Operation with detergent
Cleaning
9
EN