background image

– 4

Figure 5

Connect ray tube with hand spray gun

Tighten the screw connection of the 
spray lance fingertight.

Insert high pressure nozzle into cover-
ing nut

Install covering nut and tighten firmly

Connect the high pressure hose to the 
high pressure connection point of the 
machine.

Figure 6

Danger

Risk of explosion! Only refill diesel oil or 
light fuel oil. Unsuitable fuels, e.g. petrol, 
are not to be used.

Caution

Never operate device with empty fuel tank 
The fuel pump will otherwise be destroyed.

Refill fuel.

Close tank lock.

Wipe off spilled fuel.

Caution

Risk of injury!

Use Kärcher products only.

Under no circumstances fill solvents 
(petrol, aceton, diluting agent etc.)

Avoid eye and skin contact.

Observe safety and handling instruc-
tions by the detergent manufacturer.

Kärcher offers an individual cleaning 
and care appliances program.

Your dealer will consult you gladly.

Refill detergent.

For connection values refer to technical 
specifications

Attach supply hose (minimum length 
7.5 m, minimum diameter 3/4“) to the 
water supply set by means of a hose 
clamp.

Connect the supply hose to the water 
connection point of the machine and at 
the water supply point (for e.g. a tap). 

Note:

 The supply hose and the hose clamp 

are not included in the scope of delivery.

Connect suction hose (minimum diame-
ter 3/4“) with filter (accessory) to the 
water connection point. 

Max. suck height: 0.5 m

Until the pump sucked in water, you should:

Close the dosing valve for the deter-
gent.

Danger

Never suck in water from a drinking water 
container. Never suck in liquids which con-
tain solvents like lacquer thinner, petrol, oil 
or unfiltered water. The sealings within the 
device are not solvent resistant. The spray 
mist of solvents is highly inflammable, ex-
plosive and poisonous.

For connection values, see technical 
data and type plate.

The electrical connections must be 
done by an electrician according to IEC 
60364-1. 

Danger

Danger of injury by electric shock.

Unsuitable extension cables can be 
hazardous. Only use extension cables 
outdoors which have been approved for 
this purpose and labelled with a suffi-
cient cable cross section:

Always unwind extension lines com-
pletely.

The plug and coupling of the extension 
cable used must be watertight.

Install the hand-spray gun, the jet 

pipe, the nozzle and the high pres-

sure hose

Installing spare high pressure hose

Refill fuel

Refill detergent

Water connection

Suck in water from vessel

Power connection

8

EN

Summary of Contents for HDS 5/12 C

















Reviews: