26
English 5.906-565.0 Rev. 00 (12/12)
Squeeze out the crankshaft in small steps. Be-
tween every step, ensure that the piston rods are
not jammed or damaged by the crankshaft.
Insert a suitable pipe section, e.g. 50x2x250 mm.
Squeeze out the ball bearing and dispose of.
Caution
Risk of damage for the ball bearing. Choose the di-
ameter of the pressing mandrel so that the press-in
force acts on the outer ring of the ball bearing.
Press a new ball bearing into the crankshaft cas-
ing.
Pull the piston rod with the piston out of the crank-
shaft casing.
Caution
Risk of damage for the gasket seat. Carefully use a
screwdriver when dismantling the gasket.
Push the oil seal out of the crankshaft casing from
the inside to the outside.
or
Lever out the outer oil seal from the cylinder head
side.
7.16.4Dismantling the crankshaft
7.16.5Dismantling the oil seals
