English 5.906-565.0 Rev. 00 (12/12)
25
Mark the bearing shells (in the example: 1, 2, 3).
Loosen 6 screws.
Remove the bearing shells.
Mark the piston rods (in the example: 1 dot, 2 dots,
3 dots).
1 Flange
Loosen 4 screws.
Pull the flange off the crankshaft casing.
1 Cover
2 Bearing cover
Loosen 4 screws.
Remove the lid.
Caution
Risk of damage for the subjacent ball bearing and the
gasket seat in the crankshaft casing. Do not position
the screwdriver to close to the edge of the cover.
Drive the screwdriver into the cover and prise the
cover open.
Remove the safety ring from the shaft.
Push all pistons completely towards the cylinder
head.
7.16.3Dismantling the drive
