background image

– 7

Danger

Long hours of using the appliance can 
cause circulation problems in the 
hands on account of vibrations. 

It is not possible to specify a generally 
valid operation time, since this de-
pends on several factors:

Proneness to blood circulation defi-
ciencies (cold, numb fingers).

Low ambient temperature. Wear 
warm gloves to protect hands.

A firm grip impedes blood circula-
tion.

Continuous operation is worse than 
an operation interrupted by pauses.

In case of regular, long-term operation of 
the device and in case of repeated occur-
rence of the symptoms (e.g. cold, numb 
fingers) please consult a physician.

CAUTION

Clean engines only at places with cor-
responding oil separators (environ-
mental safety).

The appliance can be operated in a 
vertical or horizontal position.

NOTICE

The appliance is equipped with a pres-
sure switch. The motor starts up only 
when the lever of the pistol is pulled.

Device with hose drum:
Roll off the high pressure hose to-
tally from the hose drum. 

Set the appliance switch to "I".

Unlock the trigger gun and pull the 
lever of the gun.

Close the hand spray gun. 

Turn the casing of the nozzle till the 
desired symbol matches the mark-
ing.

WARNING

Unsuitable detergents can cause dam-
age to the appliance and to the object 
to be cleaned. Use only those deter-
gents that have been approved by 
Kärcher. Observe the dosage and oth-
er instructions provided with these de-
tergents. For considerate treatment of 
the environment use detergent eco-
nomically.
Follow the safety instructions for using 
detergents.

Kärcher detergents ensure smooth 
functioning. Please consult us or ask 
for our catalogue or our detergent in-
formation sheets. 

Take out detergent suck hose.

Adjust the suction volume of the de-
tergent solution at the detergent fil-
ter.

Suspend end of suction hose in a 
container filled with detergent.

Set nozzle to "CHEM". 

Spray the detergent sparingly on 
the dry surface and allow it to react, 
but not to dry.

Spray off loosened dirt with the 
high-pressure ray.

High pressure operation

Select spray type

High pressure circular 
spray (0°) for specially 
stubborn dirt
Flat low pressure spray 
(CHEM) for operating using 
detergents or cleaning at 
low pressure. 
High pressure flat spray 
(25°) for large dirt areas

Operation with detergent

Recommended cleaning method

10

EN

Summary of Contents for HD 4/9 C
















Reviews: