background image

– 10

Please arrange for the immediate 
exchange of a damaged high-pres-
sure hose.

Check appliance (pump) for leaks.
3 drops per minute are permitted 
and can come out from the lower 
side of the appliance. Call Custom-
er Service if there is heavy leakage. 

Clean the sieve in the water con-
nection.

Clean filter at the detergent suck 
hose.

Unscrew the covering nut.

Pull out the hose nipple with the 
sieve.

Clean the sieve from the outside 
and rinse it.

Note:

Align the hexagon of the hose nipple in 
the appliance for connection.

Insert the hose nipple with the sieve 
and tighten the union nut.

DANGER

Risk of injury by inadvertent startup 
of appliance and electrical shock.

First pull out the plug from the 
mains before carrying out any tasks 
on the machine. 

Get the electrical components 
checked and repaired only by au-
thorised customer service persons.

Contact an authorised customer 
service person in case of problems 
not mentioned in this chapter or if 
you are in doubt or when you have 
been explicitly asked to do so.

Check connection cable for damag-
es.

Check the supply voltage.

If the appliance is overheated:
Set the appliance switch to "0".
Allow machine to cool down at least 
for 15 minutes. 
Set the appliance switch to "1".

Call Customer Service in case of 
electrical defects.

Set nozzle to "High pressure". 

Deaerate the appliance (see "Start-
up")

Clean the sieve in the water con-
nection.

Check water supply level (refer to 
technical data).

Clean the nozzle.

Replace the nozzle.

Contact Customer Service if need-
ed.

3 drops of water per minute are permit-
ted and can leak from the bottom of the 
appliance.

With stronger leak, have device 
checked by customer service.

Check suction pipes for water and 
detergent and ensure that they are 
leak-proof.

Set the suction flow on the deter-
gent filter to the minimum quantity.

Deaerate the appliance (see "Start-
up")

Contact Customer Service if need-
ed.

Weekly

Clean the sieve in the water con-

nection

Troubleshooting

Appliance is not running

Pressure does not build up in the 

appliance

Pump leaky

Pump is vibrating

13

EN

Summary of Contents for HD 4/9 C
















Reviews: