background image

– 8

Set the suction flow on the deter-
gent filter to the maximum quantity 
after operation.

Start the appliance and rinse for 
one minute.

Release the lever of the trigger gun; 
the device will switch off.

Note:

When switching off the appliance, the 
water pressure is reduced by approx. 
55%. This reduces the actuating force 
of the hand spray gun and the service 
life of the appliance is increased.

Release again the lever of the trig-
ger gun; the device will switch on 
again.

Set the appliance switch to "0".

Disconnect the mains plug from the 
socket.

Shut off water supply.

Activate trigger gun until device is 
pressure-less.

Press the safety lever of the trigger 
gun to secure the lever of the pistol 
against being released accidentally.

Place the spray lance with the trig-
ger gun into the quiver for the spray 
lance and snap it into place in the 
spray lance holder.

Wind the connection cable around 
the cable holder.

Coil up the high pressure hose, 
hang it over the hose rack and se-
cure it by means of the rubber band.

Fasten the plug with the mounted 
clip.

Press the unlocking device of the 
push handle and slide the push 
handle in.

Warning

Frost will destroy the not completely 
water drained device.

Store the appliance in a frost free area.

Drain water. 

Pump in conventional frost protec-
tion agents through the appliance. 

NOTICE

Use normal glycol-based anti-freezing 
agents for automobiles. 
Observe handling instructions of the 
anti-freeze agent manufacturer.

Operate device for max. 1 minute 
until the pump and conduits are 
empty.

CAUTION

Risk of injury and damage! Observe 
the weight of the appliance when you 
transport it.

In order to transport the appliance 
over longer distances, pull it behind 
you holding on to the push handle.

In order to carry the appliance, hold 
on to the handles.

In order to climb stairs, pull the ap-
pliance up step by step. The skids 
protect the casing from damage.

When transporting in vehicles, se-
cure the appliance according to the 
guidelines from slipping and tipping 
over.

Interrupting operation

Turn off the appliance

Storing the Appliance

Frost protection

If you cannot store it in a frost-free 
place:

Transport

11

EN

Summary of Contents for HD 4/9 C
















Reviews: