– 2
To comply with the National Electrical
Code (NFPA 70) and to provide addi-
tional protection from the risk of electric
shock, this pressure washer should
only be connected to a receptacle that
is protected by a ground fault circuit in-
terrupter (GFCI).
Use only 3-wire extension cords that
have 3-prong grounding-type plugs
and 3-pole cord connectors that accept
the plug from the product. Use only ex-
tension cords that are intended for out-
door use. These extension cords are
identified by a marking "Acceptable for
use with out-door appliances: store in-
doors while not in use." Use only ex-
tension cords having an electrical
rating not less than the rating of the
product. Do not use damaged exten-
sion cords. Examine extension cord
before using and replace if damaged.
Do not abuse extension cord and do
not yank on any cord to disconnect.
Keep cord away from heat and sharp
edges. Always disconnect the exten-
sion cord from the receptacle before
disconnecting the product from the ex-
tension cord.
몇
Warning
To reduce the risk of electrocution,
keep all connections dry and off the
ground. Do not touch plug with wet
hands.
몇
Warning
To reduce the risk of fire, electric
shock, or injury:
Injection hazard: equipment can cause
serious injury if the spray penetrates the
skin. Do not point the gun at anyone or
any part of the body. In case of penetra-
tion seek medical aid immediately.
This system is capable of producing
25000 kPa. To avoid rupture and inju-
ry, do not operate this pump with com-
ponents rated less than 25000 kPa
working pressure (including but not
limited to spray guns, hose and hose
connections).
Before servicing, cleaning, or removal
of any part, shut off power and relieve
pressure.
High Pressure. Keep clear of nozzle.
Close cover before operating the ma-
chine.
This appliance is intended for commer-
cial use.
Do not spray electrical apparatus and
wiring.
This machine has been designed for
use with cleaning chemicals supplied
or recommended by the manufacturer.
The use of other cleaning chemicals
may affect the operation of the ma-
chine and void the warranty.
(Cold Water Only)
몇
CAUTION
When connecting the water inlet to the
water supply mains, local regulations
of your water company must be ob-
served. In some areas the unit must
not be connected directly to the public
drinking water supply. This is to ensure
that there is no feedback of chemicals
into the water supply. Direct connec-
tion via a receiver tank or backflow pre-
venter, for example, is permitted.
GROUND FAULT CIRCUIT IN-
TERRUPTER PROTECTION
EXTENSION CORDS
SAVE THESE INSTRUCTIONS
WATER SUPPLY
4
EN
Summary of Contents for HD 4.5/32-4S Eb
Page 1: ...R egister and w in w w w kaercher com HD 4 5 32 4S Eb HD 4 5 32 4S Ec 59658610 04 13...
Page 2: ...2...
Page 15: ......
