background image

– 1

WARNING 

When using this product basic precau-
tions should always be followed, in-
cluding the following:

1 Read all the instructions before us-

ing the product.

2 High pressure jets can be danger-

ous if misused. The jet must not be 
directed at persons, animals, elec-
trical devices, or the unit itself.

3 To reduce the risk of injury, close 

supervision is necessary when a 
product is used near children.

4 Know how to stop the product and 

bleed pressures quickly. Be thor-
oughly familiar with the controls.

5 Stay alert – watch what you are do-

ing.

6 Wear safety goggles.
7 Do not use acids, alkaline, solvents, 

or any flammable material in this 
product. These products can cause 
physical injuries to the operator and 
irreversible damage to the ma-
chine.

8 Do not operate the product when fa-

tigued or under the influence of al-
cohol or drugs.

9 Do not overreach or stand on unsta-

ble support. Keep good footing and 
balance at all times.

10 To reduce the risk of electrocution, 

keep all connections dry and off the 
ground. Do not touch plug with wet 
hands.

11 The Trigger Gun Safety Lock pre-

vents the trigger from accidentally 
being engaged. This safety feature 
DOES NOT lock trigger in the ON 
position.

12 Keep operating area clear of all per-

sons.

13 Follow the maintenance instruc-

tions specified in the manual.

14 Risk of Injection or Injury – Do Not Di-

rect Discharge Stream At Persons.

15 Do not use extension cord with this 

product.

16 This Product Shall Only Be Con-

nected To A Power Supply Recep-
tacle Protected By A Ground Fault 
Circuit Interrupter."

Warning

Risk of Injection or Injury – Do Not Di-
rect Discharge Stream At Persons.

This product must be grounded. If it 
should malfunction or breakdown, 
grounding provides a path of least re-
sistance for electric current to reduce 
the risk of electric shock. This product 
is equipped with a cord having an 
equipment-grounding conductor and a 
grounding plug. The plug must be 
plugged into an appropriate outlet that 
is properly installed and grounded in 
accordance with all local codes and or-
dinances.

DANGER

Improper connection of the equipment-
grounding conductor can result in a 
risk of electrocution. Check with a qual-
ified electrician or service personnel if 
you are in doubt as to whether the out-
let is properly grounded. Do not modify 
the plug provided with the product - if it 
will not fit the outlet, have a proper out-
let installed by a qualified electrician. 
Do not use any type of adapter with this 
product.

IMPORTANT SAFETY IN-

STRUCTIONS

GROUNDING INSTRUCTIONS

3

EN

Summary of Contents for HD 4.5/32-4S Eb

















Reviews: