background image

– 6

The appliance should always be con-
nected to the electrical mains using a 
plug. It is forbidden to permanently con-
nect the appliance to the power supply. 
The plug is only for mains separation.
Check the power cord with mains plug 
for damage before every use. If the 
power cord is damaged, please ar-
range immediately for the exchange by 
an authorized customer service or a 
skilled electrician.
The plug and coupling of the extension 
cable used must be watertight.
Use the extension cord that has an ad-
equate cross-section (see "Technical 
Data") and unwind it fully from the ca-
ble drum.
Unsuitable extension cables can be 
hazardous. Only use extension cables 
outdoors which have been approved 
for this purpose and labelled with a suf-
ficient cable cross section:

For connection values, see type plate/
technical data.

Warning

Observe regulations of water supplier. 
According to the applicable 
regulations, the appliance 
must never be used on the 
drinking water supply without a system 
separator. Use a suitable system sep-
arator manufactured by KÄRCHER; or, 
as an alternative, a system separator 
as per EN 12729 Type BA. Water flow-
ing through a system separator is con-
sidered non-drinkable. 

Caution
Always connect the system separator 
to the water supply, never directly to 
the appliance!

For connection values refer to techni-
cal specifications

Connect the supply hose (minimum 
length 7.5 m, minimum diameter 3/
4“) to the water connection point of 
the machine and at the water sup-
ply point (for e.g. a tap). 

Note
The supply hose is not included.

Open the water supply.

Screw the suction hose with filter 
(order no. 4.440-238.0) to the water 
connection.

Deaerate the appliance:
Unscrew the nozzle. 
Switch on the appliance and let it run 
until the water exiting is bubble-free. 
At the end let the appliance run for 
approx. 10 seconds - then switch 
off. Repeat the procedure for a cou-
ple of times.

Switch off the appliance and fit the 
nozzle again. 

Danger

Risk of explosion!
Do not spray flammable liquids.
If the appliance is used in hazardous 
areas (e.g. filling stations) all of the 
safety provisions and operating in-
structions detailed in this manual must 
be observed.

Caution
Clean engines only at places with cor-
responding oil separators (environ-
mental safety).

Note
The appliance is equipped with a pres-
sure switch. The motor starts up only 
when the lever of the pistol is pulled.

Set the appliance switch to "I".

Water connection

Connection to the water supply

Drawing in water from open reservoirs

Operation

High pressure operation

8

EN

Summary of Contents for HD 4.5/32-4S Eb

















Reviews: