![background image](http://html1.mh-extra.com/html/karcher/hd-3-5-30-4s-ea/hd-3-5-30-4s-ea_operating-instructions-manual_3983956008.webp)
English
8
Preparing the unit for use
Unpack the unit
– When unpacking the unit, check the con-
tents of the packaging. If there has been
any damage in transit inform the dealer.
– Do not dispose of the packaging with the
household rubbish, hand it in at the appro-
priate collection point for recycling.
Check the oil level
Read the oil level displayed while unit is at
a standstill. The oil level must be above the
two indicators.
Activate the oil reservoir vent
Unscrew the fastening screw of the hood
and remove the hood.
Cut off the tip on the cover to the oil reser-
voir.
Fasten the unit cover.
Mount the accessories
Mount nozzle on the spray lance (see
markings on the top of the setting ring).
Fit the spray lance to the hand-held spray
gun with pressure and flow control.
Lock cable clincher into bore lateral to the
handle.
Tighten the high-pressure hose according-
ly.
Switching on the unit
Electrical connection
Caution!
The voltage specified on the model rat-
ing plate must correspond to the voltage sup-
plied.
Do not use extension cord for this unit.
For connected loads see model rating plate/
Technical Specifications.
Caution!
It is essential that the unit is connected
to the power supply by means of a plug. An in-
separable connection to the power supply is
prohibited. The plug is used to disconnect
from the mains.
Please turn the machine switch off before re-
setting the GFCI, otherwise, the GFCI will be
damaged
GFCI INSTRUCTIONS
STEP 1:
Plug the Ground Fault Circuit
Interrupter (GFCI) into a working outlet.
STEP 2:
Press ’’TEST’’, then press
’’RESET’’ to assure proper connection to
power.
Note: The actual appearance of the GFCI
may be different from this illustration.
Water connection/Suction feed
operation
Connection to water main
Caution!
Pay attention to the regulations of the
water supply company; according to DIN
1988, the unit may not be connected direct to
the public drinking water supply. A short-term
connection via a non-return valve
(Order no. 6.412-578) is allowed.
For connected loads see Technical Specifica-
tions.
Connect a supply hose (not supplied) to the
water outlet on the unit and to the water in-
let (e.g. water tap).
Open water inlet.
1 2
Summary of Contents for HD 3.5/30-4S Ea
