Kärcher BR 40/25 C Bp Eco Pack, Manual

Page: 23 / 380

– 7

Insert the suction hose.
ATTENTION
Risk of damage. Raise the suction bar be-
fore reversing.
Note:
To put the brush drive out of operation im-
mediately release the control handle.
ATTENTION
Risk of damage. Only use the recommend-
ed detergents. For other detergents the op-
erator bears the increased risk regarding
the operational safety and risk of accidents.
Only use detergents that are free from sol-
vents, hydrochloric acid and hydrofluoric
acid.
Follow the safety instructions for using de-
tergents.
Note:
Do not use highly foaming detergents.
Recommended detergents:
 Open the cover of the fresh water reser-
voir.
 Fill in the water detergent mixture up to
the MAX marking of the filling level dis-
play. Maximum temperature of the liq-
uid 60°C.
 Close the cover of the fresh water res-
ervoir.
When the running gear is turned to the front
the appliance can be pushed to the place of
use without any contact of the brushes with
the floor.
 Raise the vacuum bar.
 Press the appliance to the bottom using
the push handle.
 Turn the running gear to the front with
your foot.
 Use the push handle to push the appli-
ance to the place of use.
1 OFF
Appliance is out of operation.
2 Scrubbing suction
Wet clean the floor and vacuum up dirt
water.
3 Wet scrubbing
Wet clean the floor and allow the deter-
gent to react.
Operation
Filling in detergents
Application Detergent
Routine cleaning of all water
resistant floors RM 745
RM 746
Routine cleaning of glossy
surfaces (e.g. granite) RM 755 es
Routine cleaning and basic
cleaning of industrial floors RM 69 ASF
Routine cleaning and basic
cleaning of fine stoneware
tiles RM 753
Routine cleaning of tiles in
sanitary areas RM 751
Cleaning and disinfection in
sanitary areas RM 732
Removal of coating from all
alkali-resistant floors (e.g.
PVC) RM 752
Removal of coating from li-
noleum floors RM 754
Driving to the Place of Use
Cleaning Programs
1
2
3
4
5
23 EN