![background image](http://html1.mh-extra.com/html/karcher/bd-60-95-rs-bp/bd-60-95-rs-bp_operating-instructions-manual_654476019.webp)
English
19
Î
Press the unlocking key.
Î
Press the accelerator carefully to drive.
Î
Note
The drive direction can also be changed
during the drive. You can thus clean very
dirty surfaces by driving back and forth a
couple of times.
In case of overloading, the drive motor auto-
matically switches off after a certain period.
Î
Allow machine to cool down at least for
15 minutes.
Î
Press again the drive fuse on the oper-
ating panel.
Note
The detergent supply and brush drive are
interrupted till further movement if the de-
vice stands at one place for more than 2
seconds.
Î
Press accelerator pedal and drive to the
surface to be cleaned.
Î
Adjust brush contact pressure using the
Brush Contact Pressure switch (4 stages).
In cleaning mode, the highest speed is lim-
ited to Stage II.
Note
Very dirty floors can be cleaned in two
rounds. In the first work step, the detergent
liquid is applied and brushed in. The vacu-
um bar is raised by pressing the Raise/Low-
er Vacuum Bar switch. In the BD model,
the rear spray guard (Aqua-Mizer) also
needs to be removed. The surface is
cleaned normally in the second step after
the detergent has worked normally.
Note
After raising the cleaning head, drive further
approx. 5 m so that the remaining water is
sucked off.
Î
Park the machine on an even surface.
Î
Turn key to "0" and remove it.
Note
Overflow dirt water tank. The suction flow is
interrupted by the swimmer when the dirt wa-
ter tank is full. Empty the dirt water reservoir.
몇
Warning
Please observe the local provisions regard-
ing the wastewater treatment.
Î
Take the dirt water discharge hose from
the support and lower above a suited
collection device.
Î
Let off dirt water by opening the screw
lid at the discharge hose.
Î
Rinse the dirt water tank with clear wa-
ter.
Î
Clean the swimmer and check the
movement of the swimmer ball.
Î
Rinse the dirt water tank with clear wa-
ter.
Î
Pull out the drain hose for fresh water
(located behind the drain hose for dirt
water) and lower it into a suitable collec-
tion system.
Î
Let off detergent by opening the screw
lid at the discharge hose.
Î
Lift the cleaning head.
Î
Turn key to "0" and remove it.
Î
Loosen the cross-handle of the spray
guard and tilt the spray guard to the
side.
Î
Remove the waste container.
Î
Empty the waste container and rinse
with water.
Danger
Risk of injury! When loading or unloading
the machine, it may only be operated on
gradients of max. 2%. Drive slowly.
Î
Remove vacuum bar, brushes and
spray guard from the device.
Î
If you want to transport the machine on
a vehicle secure it from slipping using
belts/ ropes.
1 Fastening points
Danger
Risk of injury! Before carrying out any tasks
on the machine, set the main key to "0" and
remove it. Pull out the battery plug.
BR
BD
Î
Set the drive di-
rection using
the drive direc-
tion button at
the operator
console.
Î
Select speed
range using the
speed button (3
stages).
Î
Observe the
display and wait
till the controls
are initialized.
Î
Set the drive di-
rection using
the drive direc-
tion button at
the operator
console.
Î
Select speed
range using the
speed button (3
stages).
Overload
Cleaning
BR
BD
Î
Press down-
ward the lever
for lowering the
vacuum bar.
The varuum bar
is lowered and
the suction is
activated.
Î
Lower the
cleaning head
by pressing the
button for brush
contact pres-
sure.
Î
Press Cleaning
operations key.
The brush drive
is activated.
The cleaning
head is lowered
(slight brush
contact pres-
sure) and the
detergent liquid
is supplied.
The varuum bar
is lowered and
the suction is
activated.
BR
BD
Î
Adjust the de-
tergent flow us-
ing the water
regulation
knob.
Î
Adjust the de-
tergent flow us-
ing the Dosing
Liquid Deter-
gent switch (4
stages).
BR
BD
Î
Select speed
range using the
speed button (3
stages).
Î
Select speed
range using the
speed button (3
stages).
Complete cleaning
BR
BD
Î
Raise the
cleaning head
by pressing the
Brush Contact
Pressure
switch.
Î
Pull the vacuum
bar lowering le-
ver upward; the
vacuum bar is
raised and the
suction is
switched off.
Î
Press Cleaning
operations key.
The brush drive
is switched off
and the clean-
ing head is
raised.
The vacuum
bar is raised af-
ter 15 seconds.
The suction is
switched off af-
ter 30 seconds.
Shutting down
Empty tanks.
Drain off dirt water
Drain off clean water
Emptying waste container
(only BR model)
Transport
Maintenance and care
www.motralec.com / [email protected] / 01.39.97.65.10
Summary of Contents for BD 60/95 RS Bp
