Kärcher ARMADA BRC 40/22 C, Manual

Page: 21 / 61

21
Using the T-20 Torx Driver, remove the 2 screws holding
the solenoid valve assembly to the upper deck cover.
If you have determined that the valves are good and do not leak
or are not stuck according to the solution system trouble-
shooting section and discovered the coils are bad, it is easier to
replace the coils than re-plumb the entire valve assembly. Using
a metric 4 hex key (Allen Wrench) Remove the failed coil and
replace it with one from the new solenoid.
The solenoid coils have been removed and are ready to be
replaced.
If the valve bodies need to be replaced, remove the
mounting plate from the assembly.