– 7
Press the actuation lever of the parking
brake completely to the front.
Connect the lifting device in the center
of the strut to load by crane.
DANGER
Risk of injury due to machine dropping.
–
Adhere to the local accident prevention
guidelines and safety notes.
–
Check the appliance for crane loading
for damage prior to each transport by
crane.
–
Check the lifting unit for damage prior to
each transport by crane.
–
Only lift up the appliance by this mech-
anism when loading by crane.
–
Do not use stop chains.
–
Protect the lifting device from inadvert-
ent load release.
–
Remove the spray pipe with hand spray
gun as well as loose articles prior to
transporting by crane.
–
Do not transport any articles on the ap-
pliance during the lifting process.
–
The appliance must only be transported
by properly trained crane personnel.
–
Do not stand below the load.
–
Ensure that no persons are present in
the immediate vicinity of the crane.
–
Do not leave the appliance on the crane
unattended.
Check all screws of the appliance for
tightness; retighten if necessary.
During forklift transport, secure the device
against falling using the transport eyelets
according to the applicable guidelines.
When transporting in vehicles, secure the
device against slipping and tipping over ac-
cording to the applicable guidelines.
몇
CAUTION
Risk of personal injury or damage! Consid-
er the weight of the appliance when storing
it.
This appliance must only be stored in inte-
rior rooms.
DANGER
Risk of injury! Always switch off the appli-
ance and pull out the mains plug before
care and maintenance work.
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract.
Please take advice on this matter.
Check mains cable.
The mains cable should not have been
damaged (risk of electrical shock). A
damaged mains cable must be re-
placed immediately by an authorised
Customer Service Engineer or an elec-
trician.
Check the high pressure hose for dam-
ages (risk of bursting).
Please arrange for the immediate ex-
change of a damaged high-pressure
hose.
Check oil level from the oil level display
of the high pressure pump.
Please contact Customer Service im-
mediately if the oil is milky (water in oil).
Check appliance (pump) for leaks.
3 drops per minute are permitted and
can come out from the lower side of the
appliance. Call Customer Service if
there is heavy leakage.
Clean the filter inlay.
Change the oil in the high pressure
pump.
Stopping
Transport by crane
Safety information about cranes
Safety check
Forklift transport
When transporting in vehicles
Storing the device
Care and maintenance
Maintenance
Safety inspection/ maintenance contract
Before each use
Weekly
After the first 50 operating hours
21
EN