33
Maintenance
Transporting
Pushing Machine
The machine may be pushed for short distances at
speeds not to exceed 5 mph. Be careful to avoid
damaging machine. The machine may be pushed by
hand from the rear.
NOTE: To avoid damage caused by regenerative
voltage, disconnect traction motor before towing or
pushing machine.
Trailer Loading/Unloading
Brush deck must be in the up position before loading.
Park machine in a corner of the trailer with padding
between machine and the walls, Once loaded, lower
brush deck, turn off machine, and ensure brake is
engaged. Block the tires to prevent the machine from
rolling.
Place a strap wrapping around the machine pulling it
into the corner with padding between the machine and
the strap.
Reverse process to unload.
8.644-976.0 Manual Operator CV601 RS KIRA Autonomous
