20
Maintenance
Changing Batteries - AGM
Stop the machine in a clean area. Turn off machine.
FOR SAFETY: Before leaving or servicing the
machine; stop on level surface, turn off machine
and remove key.
1. Remove doors.
2. Turn off breaker.
3. Use the proper size open end wrench to discon-
nect main ground wire first and secure cable
terminal away from batteries.
4. Disconnect main positive lead and secure cable
terminals away from batteries.
5. Prepare a suitable site to place the batteries.
6. Remove batteries from machine.
Attach suitable battery lifting device and lift battery
from the machine. Batteries are a potential environ-
mental hazard. Consult your battery supplier for
safe disposal methods.
On Board Charger
1. Stop the machine in a clean, well ventilated area
next to an AC outlet.
2. Turn "OFF" machine.
3. Open doors and turn off breaker.
Batteries emit hydrogen gas. Explosion or fire can
result. Keep sparks and open flame away. Keep
covers open when charging
4. Release the charger cord. Connect the charger AC
plug to a wall outlet. The charger gauge should
indicate that the batteries are charging. Leave
doors open slightly to allow venting.
5. When the batteries are fully charged, disconnect
the charger from the AC wall outlet and secure the
charger cord.
6.
Turn on the breaker, and close doors.
8.644-976.0 Manual Operator CV601 RS KIRA Autonomous
