Karassn KS-858G, User Manual

Page: 9 / 31

5. Keypad Programming Instructions
5.1 Preprogramming instructions
1). Program mode
[SET] + [CODE] + [OK] + [Program Directive] + [OK ]+
Directive Index + OK + Reset
Note:
［
SET
］
+
［
CODE
］ + ［
OK
］
is used to enter program state.
［
SET
］
+
［
Installer's Code
］ +
［
OK
］
is used to enter installer program state.
［
SET
］
+
［
Master's Code
］ + ［
OK
］
is used to enter
users program state.
2). The system can enter program state only in disarm state and cannot receive any alarm signals
(including low power of alarm host).
3). In program state, it can't receive any alarm signals.
4). Press “Reset” key can erase the latest inputs. Repeatedly press “Reset” key to return to the last menu.
5). If there are not any operations within 60 seconds in program state, the system will exit automatically.
6). Press “Reset”key to scroll wanted program, or press corresponding program indicative directly.
7). In program state, the system can be programmed continuously.
8) In program state, if you desire to change one Program Directive to the other one, you shall press
“Reset” key ,then enter wanted directives.
5.2 Program Instruction
Enter program state
Panel is in standby state (or repeatedly press “Reset” key to set panel in standby state). Press
［
SET
］
key, the panel will indicate“Enter Code”. LCD display will show as picture 3. You are allowed to
enter Installer Code or Master Code. Then press
［
OK
］
key. “Bi—Bi—”means setup correctly, and enter
program state. LCD display show as picture 4. If the code you input is incorrect, it will indicate that“The
code you entered is incorrect, please re-enter the code”. LCD display will show as picture 3. If wrong code
is entered three times continuously, the panel will occur on-site alarm and keyboard will be locked for one
minute automatically.
［ ］ ［ ］ ［ ］
Picture 3 Picture 4
Directive 00: Set or modify installer code
In installer program state, Press
［
00
］
+
［
OK
］
. LCD display will show as picture 5. Enter
［
new code 6 digits
］
+
［
new code 6 digits
］
+
［
OK
］
. “Bi—Bi—”means setup correctly. The LCD display will show as picture6. Press
“Reset”key for more programs.
For instance, if you want to change installer code to be “123456”. Please press
［
00
］
+
［
OK
］
+
［
123456
］
+
［
123456
］
+
［
OK
］
Installer Code default is “000000”
Picture 5 Picture 6
-7-