CAN RANGER III INSTALLATION
7
CABLES (continued)
5.
Route the cable remaining left by the lower access cover with
the connector marked REMOTE underneath the passenger side
operator console
6.
Find the connector available from the truck marked REMOTE
CONTROL and plug the connector of the main harness marked
REMOTE into it (FIG. 12)
7.
While still underneath the passenger side console, plug the red
wires exiting near the connector marked REMOTE (with spade
terminals) of the main harness into the switch previously
installed (FIG. 13) Connect to the two silver colored terminals
that are close together
8.
Route the remaining cable left by the lower access cover
underneath the driver’s side operator console, locate the
LOCAL/REMOTE switch installed earlier and connect the two red
wires as above
FIG. 10
FIG. 11
