10
2. Remove the protective film from the rear camera base bracket and select either
the top or the bottom of the rear window to position the rear camera. Press
down on the base of the bracket by hand for 30 seconds to ensure that the
sticker adhesive has attached to the electrostatic film.
3. Connect the rear camera to the front camera using the cable provided. Either
run the cable through the roof lining or under the carpet underlay as shown
below. The rear camera can rotate 360° degrees depending on the position and
type of installation method.
Method 1:
Thread the rear camera cable along the top of the roof lining and
connect it to the KPT-2200 Dash Camera.
Method 2:
Lift up the car carpet and run the rear
camera cable along the underlay of the carpet and
connect it to the KPT-2200 Dash Camera.
4. Adjust the camera by rotating the barrel until it is
capturing the entire road.
NOTE:
• While viewing live footage on the App, the rear camera will show the true
rearview image, where the license plates of vehicles behind your vehicle is
inverted. However, actual recorded images are horizontally flipped to capture
the license plate correctly.
• If the image from the rear camera is upside down, please adjust the "Mirror
Image" switch on the rear camera.
