Kapro Prolaser 897, User Manual

Page: 13 / 28

13
Scan Function
The Scan function is used to limit the area covered by the laser beam,
for safety reasons or to improve visibility and sensitivity. A smaller scan
segment will be more visible than a larger one.
The default mode is 360° rotation, which provides a horizontal or
inclined beam throughout the work area or room.
The Scan Key changes the mode from 360° rotation to
360°
 180°  90°  45°  10°  rotation.
1. Press the
Scan
Key to change the scan width.
2. The scan mark can be accurately positioned using the Clockwise and
Counterclockwise Rotation keys. Change the direction of rotation if
there is an obstruction creating a “dead” area that no laser beam can
reach.
Laser Detector
The Prolaser
®
897 Self-Leveling Rota-Line is effective
at 500ft (150m) when used together with the Laser
Detector (250ft/75m radius)
Use the Laser Detector when it is hard to see the laser
beam, such as outdoors or in bright rooms.
Attach the Laser Detector to a rod if the laser unit is
positioned above head height.