Kapro Prolaser 897, User Manual

Page: 17 / 28

17
4. The indicator lamp on the battery charger illuminates when charging.
The indicator lamp will flash when the battery is fully charged.
5. The batteries can be removed from the Rotary Laser by unscrewing
the screws holding the battery compartment cover in place
.
Laser Detector
1. Press the battery compartment lock and remove the battery compart
ment cover.
2. Remove the 9V alkaline battery.
3. Replace with a new 9V alkaline battery.
Remote Control
1. The battery compartment is situated in the back of the remote control.
2. Slide off the battery compartment cover.
3. Remove the spent batteries.
4. Replace them with two “AAA” batteries.
5. Replace the cover.
External Power Supply
The Prolaser
®
897 Self-Leveling Rota-Line can use an external DC
external power source. This will minimize the risk of battery failure
during operation.
Use only the combined Battery Charger-AC/DC Converter supplied with
the Rotary Laser, otherwise irreparable damage will be caused to the
instrument and your warranty will be invalid.
The suitable power range of the combined Battery Charger-AC/DC
Converter is 50 – 60Hz, voltage 110 – 220 VAC.