Kapro Prolaser 897, User Manual

Page: 8 / 28

8
Avoid setting up the laser near heavy
machinery or sources of vibration that may adversely affect the
leveling of the Laser.
Note
To get the most out of your Prolaser ® 897 Self-Leveling Rota-Line,
please adhere carefully to the following instructions.
Operating Instructions
Horizontal Plane (Automatic Mode)
Place the Rotary Laser on firm and dry ground or on a standard 5/8"
tripod (not included) or ceiling to floor leveling pole (not included) or wall
mount accessory (not included).
1. Set up the Rotary Laser approximately level; the instrument can
compensate for up to ±4° from the horizontal plane.
2. Press the Power key. The Power Indicator will light up. If the instru
ment is set up outside the ±4° limit the Manual Indicator will blink,
the laser beams with not be projected and rotation will not begin.
Please turn off the instrument and set up again.
3. Verify that the Rotary Laser is in automatic mode – the Manual Indi
cator must be unlit.
4. The Rotary Laser is ready for work when the Power Indicator is lit,
the Manual Indicator has stopped blinking, and the laser beams are
projected. The instrument is now level and the laser head will rotate
clockwise at 600 rpm.