EN
A. DONNING THE BELT:
A.1
Identify all buckles and
straps.
A.2
Place the belt support on
the back and pass the strap
ends to front around the waist..
Take care do not twist the strap.
A.3
Fasten the waist belt
buckle.
A.4
Tighten the strap. The straps should fit tight
around the waist. Free end of the strap must be
kept by the plastic keepers.
A.7
Lateral attachment D-rings should be posi-
tioned symmetrically on both sides at the waist
level.
B. CONNECTING THE BUCKLES
C. ADJUSTING THE STRAP
C.1
Tightening
C.2
Loosening
D. ATTACHING THE BELT
D.1.
connecting work positioning systems
Work positioning lanyard can be attached to the work positioning belt lateral EN
358 D-rings. Work positioning lanyard must be anchored to the point of
construction that is situated at waist level or above. Work positioning lanyard must
be kept taut during use. It is strictly forbidden to use the work
positioning belt for fall arrest puroposes. The belt shouldn’t be used if there is a
foreseeable risk of the user becoming suspended or being exposed to
unintended tension by the waist belt. When using a work positioning system, the
user normally relies on the equipment for support, therefore it is
essential to consider the need of using a back-up, e.g. a fall arrest system. There is
the essential need to reularly check fasteninig and adjustment
elements during use.
D.2
connecting restraint system
Retstraint system can be attached to the work posi-
tioning belt D-rings.
is not intended for work in situations where the user
needs support from the body holding device
(e.g. to prevent him from slipping or falling).
The length of the restraint lanyard (L) must be shoter
than the distance from the
anchor point to the fall arrest zone (R) to prevent the
user rom reaching areas or positions where the risk of
a fall from a height exists. Restraint system
is not intended to arrest a fall from a height and
A.3
A.4
A.5
A.7
A.6
A.8
A.1
A.2
A
EN358
B
C
-
+
C.1
C.2
D
R
L<R
D.1
D.2
L
A.3
A.4
A.5
A.7
A.6
A.8
A.1
A.2
A
EN358
B
C
-
+
C.1
C.2
D
R
L<R
D.1
D.2
L
A.3
A.4
A.5
A.7
A.6
A.8
A.1
A.2
A
EN358
B
C
-
+
C.1
C.2
D
R
L<R
D.1
D.2
L
A.3
A.4
A.5
A.7
A.6
A.8
A.1
A.2
A
EN358
B
C
-
+
C.1
C.2
D
R
L<R
D.1
D.2
L
