6. Data Output
24
6.2 Digital Output
6.2.1 Preparation for Digital Output
To download the data stored in the ANEMOMASTER to your PC, connect the
ANEMOMASTER to your PC using the RS232C cable (Optional).
<What you need>
●
Personal Computer
●
RS-232C Cable (Sold Separately)
●
Communication Software (Example: Windows has hyper terminal software.)
<Baud Rate Setting>
The baud rate setting of the instrument and the PC must be the same.
The baud rate setting of the main unit is as follows:
*As for the baud rate setting, refer to “7.2 Other Function Settings” in page 29.
As for your PC setting, refer to the operation manual of your PC
<Connecting the instrument to a PC>
(1)
Connect the instrument to a PC by inserting a connecting cable into RS232C terminal on the instrument.
(2)
Turn ON the instrument.
Make sure that instrument is in Normal Measurement mode.
RS232C Cable Wiring Diagram
PC (D-Sub9 pin)
Connection
ANEMOMASTER
Signal
Pin No.
Pin No.
Signal
Description of Signal
Signal Direction
NC
1
1
GND
Signal Ground
RXD
2
2
TXD
Transmitting Data
Output
TXD
3
3
RXD
Receive Data
Input
NC
4
4
CTS
Clear to Send
Input
GND
5
5
RTS
Request to Send
Output
NC
6
6
NC
RTS
7
CTS
8
NC
9
* The measurement software is available for Windows. (Sold separately)
Data Bit Length
8 bits
Parity
None
Stop Bit
1
Delimiter
CRLF
Baud Rate
Based on the setting value*
RS232C Terminal
