4. Saving and Deleting Measurement Data
15
4.2 Deleting Measurement Data
4.2.1 Deleting All: Deleting All Stored Measurement Data
DISPLAY
PROCEDURE
Press
and
keys simultaneously for 4 seconds or
longer on the Normal Measurement screen (Measurement Mode). Then
“n-00” will be displayed as shown in the left, and all of the stored data
will be deleted.
4.2.2 Deleting the Last Data: Deleting a Single Measurement Data Last Stored
DISPLAY
PROCEDURE
<Measurement Mode Screen>
Press
key for over a second in the Normal Measurement
screen (Measurement Mode).
(This procedure can be performed in any measurement mode of
measuring Air Velocity, Air Temperature, and Pressure.)
“n-xx” shows up as shown in the left, and the data stored at the last will
be deleted.
(The number representing by xx indicates the total amount of stored
data after the deletion. “n-00” indicates that there are no stored
measurement data.)
The only data you can delete using this procedure is the last data you
stored and the other data cannot be deleted. (For example, when 75 data
is stored, you cannot delete the 40
th
data.)
m/s
Total amount of stored
measurement data
m/s
m/s
