Kanmed Operatherm OP3, Service Manual

Page: 6 / 34

Technical manual KANMED Operatherm OP3
Page
6
of
34
SPARE PARTS
Article no. Product Comment
700-0751 Rubber Frame NOTE: Two pcs per unit is required.
700-0766 Rear label
700-0748
PAD Connector
casing
Plastic pad-connector housing (top/bottom) incl. screws.
700-0765 CU Front label
300-001 CPU unit incl front (OP303-1 Display and Computer board)
300-002 Main board (Op303-2)
300-003 Power board (OP303-3)
300-004 Power transformer (the large power transformer, 2 x 28,6 V 300 VA)
300-005 Power transformer (electronics power supply transformer, 10,3 V 9 VA)
300-006 Mains power intake With RF filter
300-007 Connector Saver 37 pin F/F
300-008 CU Rear panel excl. label
300-011 Cable kit Internal control unit cable kit
300-012 CU Handle
300-013 CU Bottom plate
300-014 CU Cabinet (naked cabinet)
700-0255 Elastosil A07, 90ml Silicon based adhesive for fixing the rubber frames.
OP303-1, Display and computer board OP303-2, Main board
OP303-3, Power board Cabinet assembly