Technical manual
KANMED Operatherm OP3
Page
13
of
34
Writing Logs to USB.
Note
: This operation requires an empty Kanmed approved
USB-memory stick (<2 GB, FAT32 formatted). It can also be
performed with the Customer Software Version.
1. Fit the USB-memory stick into the internal USB connector.
2. Select Menu/Settings/Logs to USB. Press “Enter”
3. The message “WritingLogs” are displayed as long as the
writing process continues. Leave the system, it will normally
take a few minutes.
4. When the writing process is completed, the “WritingLogs”
message disappears. The USB stick can now be safely
removed.
