KanexPro SP-HDBT1X4, Operation Instruction Manual

Page: 5 / 23

SP-HDBT1X4
1
1. Introduction
1.1 Introduction to HDBaseT Splitter
The KanexPro SP-HDBT1X4 is an HDBaseT Splitter accepting 1 HDMI input and
distributing to 4 HDBaseT outputs, plus 1 HDMI local output. The HDMI output can be
used to monitor local displays or cascade up to 4 times with additional HDBaseT splitter
It allows uncompressed 4K (max) HDMI, IR, and RS232 signals to be transmitted over a
single CAT5e/6/7 cable up to 60m. The unit is also capable of bi-directional IR
transmission, EDID management and PoE.
HDMI Twisted Pair PoE Receiver is recommended to utilize the full function of the
HDBaseT outputs of this device.
(Not included, part # HDBASE70POER)
1.2 Features
l Supports and conforms to HDMI 1.4 Specs & all 3D formats
l Supports high resolutions up to 4Kx2K
l Supports PoE (Power over Ethernet)
l Extend HDBT signals up to 60 meters using Cat6 cable
l
Supports IR control and cascade control
l Supports RS-232 control and cascade control
l Real-time display of working status via LED indicators
l Supports 5 types EDID configuration
l Support cascading via HDMI OUT, IR Loop and RS232 Loop
1.3 Package List
Ø
1 x HDBaseT Splitter
Ø 2 x Mounting ears (separate from HDBaseT Splitter)
Ø 8 x Screws
Ø 1 x 3.5mm Male-male Audio cable (used for IR signal cascade)
Ø 1 x RS232 cable (3-pin captive connector to DB9)
Ø 1 x RS232 cable (connect 2 3-pin captive connectors for cascading)
Ø 4 x Plastic cushions
Ø 1 x Power Cord