SP-HDBT1X4
11
Please set the parameters of COM number, bound rate, data bit, stop bit and the parity
bit correctly, and then you are able to send command in Command Sending Area.
Command format:
ID +Port RS232 command.
Of which port number stands for the HDBT port that the device to be controlled is
connected to, the value varies from 1~4.
For example, if the ID of the HDBaseT Splitter is 01, and the device to be controlled is
connected to HDBT port 2, then send the command “1B1.” as “0121B1.”.
Parameter Configuration area
Monitoring area indicates if the
command sent works.
Command Sending area
Summary of Contents for SP-HDBT1X4
Page 19: ...SP HDBT1X4 15 6 Panel Drawing...
