G-SA060-002
Recommended mounting system for installation method 2 is “Solar Mount
/S-5! PV Clamp Sets” made by UniRac, Inc. Install the mounting system as
instructed by a installation manual of the mounting system. (Refer to installation
manual provided by UniRac.) Then, fix the MODULES with the cramps (4 pairs
or more per module). The cramps should be fixed to the side frames of
MODULES. Cramps A - B and C - D in the diagram below must be located
symmetrically. The distance between the center of the 2 cramps must be 660 –
950mm.
Optimize the tightness of the cramps with greatest care so that the MODULES
will not come off and so that the cramps will not break the frames of the
MODULES and/or glasses.
Handling Instruction to install a mounting system
*Do not shock the MODULES (e.g. by stepping on it), as this may break the glass
part and cause malfunction, electric shock and injury.
*Wear a safety belt, protection footwear, and protection gloves when installing
the MODULE to prevent falling and electric shock.
*Beware of electric shock and short-circuit, as the MODULE generates high-
tension current when exposed to light.
660 - 950mm
A
B
C
D
http://www.wholesalesolar.com/solar-panels.html
