KANEKA G-SA060 Installation Manual Download Page 2

 

G-SA060-002

 

 

Warning

 

Meaning of signs 

 

Not Allowed 

No Disassembly 

 

No Touching

 

Procedures Must be Followed. 

Beware of Electric Shock 

 

 

 

Do not disassemble Kaneka thin-film 

silicon photovoltaic module(s) (hereinafter 

referred to as the MODULE(S)), as this 

may cause fire, electric shock, and injury.

 

Do not shock the MODULES (e.g. by 

stepping on it), as this may break the glass 

part and cause malfunction, electric shock 

and injury.

 

 

Follow the procedure in this manual when 

installing the MODULE and its platform.

 

Beware of electric shock and short-circuit, as 

the MODULE generates high-tension current 

when exposed to light.

 

 

 

Wear a safety belt, protection footwear, and 

protection gloves when installing the 

MODULE to prevent falling and electric 

shock. (Install safety fence and scaffolding 

to prevent falling.)

 

The platform, connection box, and the 

inverter (power conditioner) must be 

grounded based on the regulation about 

grounding method.

 

 

 

Do not expose the MODULE to the 

artificially concentrated sunlight.   

 

 

 

http://www.wholesalesolar.com/solar-panels.html

Summary of Contents for G-SA060











Reviews: