Kane KANE251, Manual

Page: 7 / 40

Page 7
1. BATTERIES
Battery Type
This analyser has been designed for use with disposable alkaline
batteries or rechargeable Nickel Metal Hydride (NiMH) batteries. No
other battery types are recommended.
WARNING
The battery charger unit must only be used when NiMH batteries are
fitted. Do not mix NiMH cells of different capacities or from different
manufacturers. All four cells must be identical.
Replacing Batteries
Turn over the analyser, remove its protective rubber cover followed by
the battery cover and fit 4 “AA” batteries in the battery compartment.
Take great care to ensure that they are fitted with the correct battery
polarity. Replace the battery cover and the protective rubber cover.
Switch the analyser on and check that the analyser’s date and time are
correct. To reset the date and time, see using the MENU section.
Charging NiMH batteries
Ensure that you use the correct charger. Part number 19278
To fully charge NiMH batteries:
Switch the KANE251 on. The charger should be connected and switched
on. When charging the red Battery charging indicator will illuminate.
Switch the KANE251 off. The display will show BATTERY and a battery
symbol.
The first charge should be for 12 hours continuously. NiMH are suitable
for top up charging at any time even for short periods.
Battery Disposal
Always dispose of depleted batteries using approved disposal methods
that protect the environment.