The KANE-PU690V meets the
standard (2012/19/EU) WEEE. This
marking indicates that this product
should not be disposed with other
household wastes throughout the
EC. To prevent possible harm to the
environment or human health from
uncontrolled waste disposal, recycle
it responsibly to promote the
sustainable reuse of material
resources. To return your used
device, please use the return &
collection systems or contact the
retailer where the product was
purchased. They can take this product
for environmental safe recycling.
The instruction manual contains
information & references, necessary
for safe operation & maintenance
of the instrument. Prior to using
the instrument the user is kindly
requested to thoroughly read the
instruction manual & comply with it
in all sections.
Failure to read the instruction manual
or to follow the warnings &
references contained herein can
result in serious bodily injury or
instrument damage. The respective
accident prevention regulations
established by the professional
associations are to be strictly
enforced at all times.
III. Instrument Symbols (continued)
IV. KANE-PU690V Series Specification
5
6
KANE-PU690V Proving Unit Specifications
KANE-PU690V
Voltage Output
690V AC
Output current
<3.5mA
Frequency
50 Hz
Load
≥200 KΩ
High Voltage LED
✓
Low Voltage LED
✓
Low battery indication
≤ 7.6V
Safety rating
CAT II 750V
Operating temperature
-10°C to 40°C at max
Storage temperature
-10°C - 50°C
Relative humidity
≤70% non-condensing
Altitude
Up to 2000m
Pollution Degree
2
Dimensions (H/W/D)
140mm x 80mm x 50mm
Weight (net)
400g
Power supply
6 x 1.5V (LR6) AA (supplied)
EAN
5039046000540
Measurement category II is for
measurements performed on
circuits directly connected to the
low-voltage installation. Examples
of this would be; measurements
on household appliances, portable
tools & similar equipment.
