1. Operating Instructions
Proof Testing
Insert the voltage tester probes into the
output sockets (690V AC). Apply sufficient
pressure to ensure a good connection.
Check the voltage indication on the
voltage tester under test. Ensure the output
voltage LED is on during the test. Once
visual indication has been confirmed &
verified, remove the right test probe first
before removing the left test probe.
7
Please note the output voltage may
not be 690V & will depend upon
the load applied by the voltage
indicator.
Voltage output against load resistance chart
2. Battery Replacement
Position the KANE-PU690V face down
& release the single captive screw in the
battery compartment cover.
Remove the battery compartment cover.
Remove the discharged batteries from
the compartment.
Fit a new set of LR6 (AA) 1.5v batteries.
Relocate the battery cover over the
battery compartment & fasten in
position with the battery cover captive
screw.
8
All voltage indicators draw <3.5mA
& will indicate up to 690V but other
manufacturers’ instruments may
vary.
V. Display & Controls
unit
Proving
PU690
690V AC
Output Voltage On LED
Low Battery
Indicator
Voltage
Output Points