Supplied By www.heating spares.co Tel. 0161 620 6677
KANE450
manual
Page
3
KANE450
User Guide
The
KANE450
Combustion Analyser measures O
2,
differential temperature,
differential pressure and CO.
It calculates efficiency (Nett, Gross or Condensing), losses, the CO/CO
2
ratio,
Poison Index, excess air and CO air free in ppm only..
The analyser can be upgraded with the addition of a Nitric Oxide sensor either
on initial purchase (Order Code: KANE450N) or as a retrofit as part of an
annual service procedure.
In addition the KANE450 Combustion Analyser’s CO sensor checks carbon
monoxide levels in ambient air - useful when a CO Alarm is triggered .. and
tests the safety of appliances.
The CO and NO readings can be referenced to the oxygen reading in ppm or
mg/m
3
.
All analysers have a protective rubber sleeve with a magnet for “hands–free”
operation and their flue probes work on all combustion appliances and take
ambient air measurements.
The large display shows 4 readings at a time and all data can be printed via an
optional infrared printer. The printed data can be 'live' data, 'frozen data' or
stored data. 255 sets of tests can be stored. Note: stored data is lost if the
batteries are removed or are exhausted. Two lines of 16 characters can be added
to the header of printouts.
The analysers are controlled using 4 buttons and a rotary dial.
The four buttons (from left to right) switch on and off the analyser, print actual
or frozen data/ switch on and off the backlight, switch on and off the pump and
“freeze”/ hold data. The buttons with UP, DOWN and ENTER arrows also
change settings such as date, time, fuel source etc. when in MENU mode.
The rotary dial changes the LED indicated display line and selects access to the
menu to make changes to the date, time, fuel, etc.