Kamweld
STAINLESS STEEL
Welding Products
KHD
The KAMWELD Heating Device is used for bending plastic
sheets of different widths and lengths. This bending device
heats thermoplastic sheets in order to make straight-line
bends that are necessary when fabricating items such as
hoods, ducts, tanks, displays, signs and many other items.
KHD consists of two rectangular aluminum heating bars,
two control switches for adjusting the temperature and
two aluminum base units. Each heating bar contains
an electric heating element that provides uniform heat.
Four sizes are available: 28”, 54” , 96” & 144”.
44-AWC
300 and 400, or 700 watt
combination for model 44-AW
HSC
600, 750, and 900 watt for
model 43-HS
RWC
350 watt for model 46-RW and
600 watt for model 47-RW
HTC & HSC
350 and 450 watt for model
41-HT and model 42-TM
KHAG
The KAMWELD Hot Air Gun is supplied complete with an
air regulator and pressure gauge, a 2” long, 5/8” diameter
stainless steel flanged round tip with check-nut and 5 ‘ of
insulated cable. A stainless steel wrap-around mounting
bracket permits permanent mounting to existing equipment,
and the gun may be grounded through the mounting
bracket. Two models available. Both models are designed
for use with 115 volts AC, but they can be supplied for a
230 volt system.
Kamweld Technologies, Inc.
Kamweld Technologies, Inc. is a leading provider of plastic welding products, industrial
hot air guns, plastic sheet bending devices and accessories. For nearly 50 years, the
Kamweld name has stood for superior products, rugged durability and highly competitive
prices. All of our products are developed, manufactured, tested and packaged within
the USA, resulting in consistent quality and rapid turnaround time.
14
Visit www.kamweld.com for more information or to place an order today.
