Kamstrup MULTICAL 603 Installation And User Manual Download Page 18 | Manualshive

Page: 18 / 24

Kamstrup MULTICAL 603 Installation And User Manual Download Page 18

18

Kamstrup A/S • 55122070_A2_GB_07.2017

MULTICAL® 603

8.6 M-Bus + pulse inputs, type HC-003-20

M-Bus module with primary, secondary and
enhanced secondary addressing.
The module is connected to an M-Bus master
via terminals 24 and 25 using a twisted pair.
The polarity is without importance for the
functionality.
The module is powered by the connected
master.

8.7 M-Bus + pulse outputs, type HC-003-21

M-Bus module with primary, secondary and
enhanced secondary addressing.
The module is connected to an M-Bus master
via terminals 24 and 25 using a twisted pair.
The polarity is without importance for the
functionality.
The module is powered by the connected
master.

8.8 M-Bus + Thermal Disconnect, type HC-003-22

M-Bus module with primary, secondary and
enhanced secondary addressing. The module
is connected to an M-Bus master via terminals
24 and 25 using a twisted pair. The polarity is
without importance for the functionality.
The meter must be supplied by 24 VAC or 230
VAC.
The module requires an external 24 VAC power
supply for operating the connected actuator.

«
...
16
17
18
19
20
...
»

Summary of Contents for MULTICAL 603

























Reviews:

No comments