Kamstrup MULTICAL 603 Installation And User Manual Download Page 10 | Manualshive

Page: 10 / 24

Kamstrup MULTICAL 603 Installation And User Manual Download Page 10

10

Kamstrup A/S • 55122070_A2_GB_07.2017

MULTICAL® 603

3.5 Installations with two ULTRAFLOW® sensors

MULTICAL® can be used in various applications
with two ULTRAFLOW® sensors, including leak
surveillance and open systems. As a main rule,
when two ULTRAFLOW® sensors are installed
with one MULTICAL®, a close electric coupling
between the two pipes ought to be carried out
on which the two flow sensors are mounted. If
the two pipes are installed in a heat exchanger,
close to the flow sensors, however, the heat
exchanger will provide the necessary electric
coupling.

ULTRAFLOW®

MULTICAL®

ULTRAFLOW®

Electrical connection

• Inlet and outlet pipes are closely electrically coupled.
• The parts of the pipe installation that are electrically connected to the flow sensors must bot be

subjected to soldering.

In installations where the electric coupling
is not possible or welding

*

can occur in the

pipe system, the cable from one ULTRAFLOW®
must be led through a Pulse Transmitter to
obtain galvanic separation before the cable is
connected to MULTICAL®.

* Electric welding must always be carried out

with the earth pole closest to the welding
point. Damage to meters due to welding is
not comprised by the factory guarantee.

ULTRAFLOW®

MULTICAL®

Pulse Transmitter

ULTRAFLOW®

«
...
8
9
10
11
12
...
»

Summary of Contents for MULTICAL 603

























Reviews:

No comments