TECHNICAL DESCRIPTION
Kamstrup 162M/382M
5512-1040 GB/05.2012/Rev. C1
66
10.6
Label
The label consists of two labels: a meter label describing the choices made under type number, and a customer
label created on basis of the customer's wishes, and which the customer must approve before an order can be
created to the customer.
Four standard customer labels without customer logo are available.
These standard customer labels are:
2019000
No bar code
No meter number
2019001
Code 128
Meter number = serial number
2019002
2 of 5 interleaved
Meter number = serial number
2019003
Code 39
Meter number = serial number
The following information is required for the creation of a new customer label:
Customer logo must be provided to the Electricity Product Group. The logo must be in black/white and in one of
the following formats: JPG, WMF.
Information about the bar code type to use and its content, serial number, meter number, installation number,
and the position of numbers and bar code must also be provided.
When all information is available, a draft is prepared, which must be approved by the customer. The bar code
should also be read by the customer in order to secure that his/her bar code reading device can read the bar
code.
After approval, a customer label no. 2019XXX is selected, and the number is released in Kamstrup ordering
systems.
123450000
123450000
Standard logo size position
Customer specified
Bar code type and size position
Customer specified
Text size and type position
Customer specified
Label for 3-phase and Aron meter
Label for 1-phase meter
Figure 20: The customer label 2019xxx for three-phase and one-phse meters.
The customer label 2019xxx, is the same size on all metertypes. This means that the same customer label can be
used both on the single-phase and the poly-phase meter.
