background image

11

2.  Once the room temperature feels 

comfortable, turn the variable 

thermostat control slowly to the 

minimal position until a click 

sound is heard. This thermostat 

control is now activated and 

will automatically cycle the fan 

heater off and on to maintain  

the desired temperature.

Setting the Oscillation 

(KFH660 only)

The oscillation function will work in 

all heat and fan modes. Switch the 

‘SWING’ button to ‘I’ to activate. This 

will allow the heater to oscillate back 

and forth. To stop the unit oscillating, 

switch the ‘SWING’ button to ‘0’.

Safety Features 

Safety Tip-Over Cut-Out Switch

There is a tip-over switch fitted to  

the base of the heater. If the heater  

is accidentally tipped over, the  

heater will stop operating. Once 

placed back into the upright position, 

the heater will switch on again. 

ThermoGuard Overheating  
Safety Device

Your heater is fitted with a safety 

device that switches off the heater in 

the event of overheating.  

Should this heater stop working,  

turn off the heater and inspect the 

air inlet and outlet for blockages. 

Wait until the unit is fully cooled for 

the protection system to reset before 

attempting to restart the heater.  

If the heater fails to operate or the 

safety device switches off again,  

take the heater to your nearest 

Kambrook service centre for 

examination or repair.

 

WARNING:

 In order to 

avoid overheating do not 

cover the fan heater.

 

WARNING:

 KFH600 heater 

is not equipped with a 

device to control the 

room temperature. Do 

not use KFH600 heater 

in small rooms when 

they are occupied by 

persons not capable of 

leaving the room on their 

own, unless constant 

supervision is provided.

Hints & Tips to Retain Heat in 

Your Home

• Don’t overheat your home. The 

temperature of a heated room in 

winter should be 18-21°C.

• Your heater will work more 

efficiently if you stick to Kambrook’s 

recommended clearance spaces.

• Choose the right size heater for the 

room type you want to heat.

• Zone off unoccupied rooms by 

closing doors and only heat the 

main living areas. Fit window 

coverings like curtains to halve 

winter heat loss.

• Put draft stoppers, such as a rolled 

up towel, at the bottom of outside 

doorways to keep out cold air.

• Keep the heat in and the cold 

out by installing wall and ceiling 

insulation.

• Avoid placing items too close to 

the heater (both at the front and 

back) for optimal air flow.

Summary of Contents for Suits KFH600













Reviews: